Firmware Xiaomi Redmi 11 Prime

OS: Android v12

CPU: 2 GHz, Octa Core Processor

RAM: 4 GB

Display: 6.5 inches, 1080 x 2400 pixels, 90 Hz

Battery: 5000 mAh, Li-Po Battery

Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on your phone's SD card.
- After that, turn off your smartphone.
- Depending on the phone manufacturer, press a specific combination of buttons on the phone body. A universal option is to try pressing the following keys.
- Press the buttons: Volume up (or Volume Down) (+Home) + Power together for a while.
- The phone will now boot into Recovery mode.
- Use the volume buttons to navigate through the menus and press the Power button to make a selection.
- Use the volume buttons to select 'Wipe data / factory reset'.
- Select 'Yes - delete all user data' from the menu.
- Next in the menu, select 'Wipe cashe partition'.
- Select 'Yes - Wipe cache' from the menu.
- Next select 'advanced' in the menu.
- Select 'Wipe Dalvik Cache' from the menu.
- Next in the menu, select 'Yes - Wipe Dalvik Cache'.
Go back, press 'Go Back'.
- Next in the menu, select 'mounts and storage' .
- Use the volume buttons to select 'format / system' .
- Next in the menu, select 'Yes - Format' .
Go back, press 'Go Back'.
- Highlight 'install zip from sdcard' .
- Choose 'choose zip from sdcard' .
- Next in the menu, select 'Yes - Install your firmware name' .
- Use the volume buttons to highlight 'Reboot system now' .

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the SD card of your phone.
- Go to TWRP recovery. This is done by analogy with CWM.
- Perform a factory reset by tapping the 'Wipe' option in the main menu. When finished cleaning the phone, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and find the previously downloaded firmware image. Click on it by dragging the slider to the side.
- After that, the firmware process will start. This will take about 2-3 minutes.
- Upon completion, the utility will automatically display a message about successful flashing. By clicking on the item 'Reboot System', reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- Copy the .zip archive with the image, and place it in the folder with 'ADB'
- Put your smartphone in fastboot mode and write the prompt in the command line: fastbooflash zip filename.zip, where filename.zip is the name of your firmware.
- Wait for the end of the installation and reboot the device.