Firmware Xiaomi Mi 11 Pro

OS: Android v10

CPU: Octa core (3.1 GHz, Single core, Kryo 585 2.42 GHz, Tri core, Kryo 585 1.8 GHz, Quad core, Kryo 585)

RAM: 12 GB

Display: 6.67 inches (16.94 cm)

Battery: 5000 mAh

Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware you are interested in and place it on the phone's SD card.
- Turn off your phone with the Power button.
- Clamp a certain sequence of buttons on the phone case. The set of keys may vary depending on the manufacturer of the device. A universal option is to set the following clicks.
- Press the Power + Volume up (or Volume Down) (+Home) buttons together for a few seconds.
- The phone will now boot into Recovery mode.
- Use the volume buttons to navigate the menu, and use the Power button to select.
- Select 'Wipe data / factory reset' from the menu.
- Select 'Yes - delete all user data' from the menu.
- Use the volume buttons to select 'Wipe cashe partition' .
- Select 'Yes - Wipe cache' from the menu.
- Use the volume buttons to select 'advanced'.
- Select 'Wipe Dalvik Cache' from the menu.
- Use the volume buttons to select 'Yes - Wipe Dalvik Cache'.
Go back, press 'Go Back'.
- Use the volume buttons to select 'mounts and storage' .
- Select 'format / system' from the menu.
- Use the volume buttons to select 'Yes - Format' .
Go back, press 'Go Back'.
- Select 'install zip from sdcard' .
- Choose 'choose zip from sdcard' from the menu.
- Use the volume buttons to select 'Yes - Install your firmware name' .
- Use the volume buttons to highlight 'Reboot system now' .

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the device's memory.
- Go to TWRP Recovery. Just like in CWM.
- Perform a factory reset by tapping the 'Wipe' option in the main menu. When finished cleaning the phone, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and find the previously downloaded firmware image. Click on it by dragging the slider to the side.
- After that, the firmware process will start. This will take about 2-3 minutes.
- Upon completion, the utility will automatically display a message about successful flashing. By clicking on the item 'Reboot System', reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- First, copy the .zip archive with the image, and place it in the folder with 'ADB'.
- Put your device into fastboot mode and write a prompt in the command line: fastbooflash zip filename.zip.
- Wait until the end of the installation and reboot the device.