MobileXfiles.com
  Smartphones > Realme > Realme 10 5G

Firmware Realme 10 5G


 Specification Realme 10 5G 
 Unlock Realme 10 5G 
 Root Realme 10 5G 
 Developer Mode Realme 10 5G 
 Bypass Lock Screen Realme 10 5G 
 Realme 10 5G Factory Reset 
 Bypass FRP Realme 10 5G 
 Secret codes Realme 10 5G 
 Screenshot Realme 10 5G 
 Compare Realme 10 5G 

Realme 10 5G


OS: Android 12, Realme UI 3.0

CPU: Octa-core (2x2.2 GHz Cortex-A76 & 6x2.0 GHz Cortex-A55)
RAM: 128GB 8GB RAM, 256GB 8GB RAM
Display: 6.6 inches, 104.9 cm2 (~85.0% screen-to-body ratio)
Camera: 50 MP, f/1.8, (wide), 1/2.76", 0.64µm, PDAF
Unspecified MP, f/2.8, 46mm (telephoto)
2 MP, f/2.4, (macro)
Battery: Li-Po 5000 mAh, non-removable


Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on your phone's SD card.
- Next, turn off your phone.
- Depending on the phone manufacturer, press a specific combination of buttons on the phone body. If you don't know the combination you want, try pressing the following keys.
- Press the Power + Volume up (or Volume Down) (+Home) keys together for a few seconds.
- As a result, the phone will boot into Recovery mode.
- Use the volume buttons to navigate the menu, and use the Power button to select.
- Then select 'Wipe data / factory reset' from the menu.
- From the Recovery mode menu, select 'Yes - delete all user data'.
- From the Recovery mode menu, select 'Wipe cashe partition'.
- From the menu select 'Yes - Wipe cache' .
- Then select 'advanced' from the menu.
- From the menu select 'Wipe Dalvik Cache'.
- Select 'Yes - Wipe Dalvik Cache' and confirm with the Power button.
Go back, press 'Go Back'.
- Then select 'mounts and storage' from the menu.
- Then select 'format / system' from the menu.
- Select 'Yes - Format' and confirm your choice with the Power button.
Go back, press 'Go Back'.
- Highlight 'install zip from sdcard' .
- Then select 'choose zip from sdcard' from the menu.
- Select 'Yes - Install your firmware name' and confirm your choice with the Power button.
- Now from the Recovery mode menu select 'Reboot system now' .

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the SD card of your phone.
- Go to TWRP recovery. This is done in the same way as with CWM.
- Perform a factory reset. When cleaning the phone is finished, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and find the previously downloaded firmware image. Click on it by dragging the slider to the side.
- The flashing process will take about 2-3 minutes.
- After completion, you must click on the 'Reboot System' item, and reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- Copy the archive with the firmware image to the folder with 'ADB'
- Put your smartphone in fastboot mode and write the prompt in the command line: fastbooflash zip filename.zip, where filename.zip is the name of your firmware.
- Wait for the end of the installation and reboot the device.


User questions and comments about firmware Realme 10 5G





Post your question or comment