MobileXfiles.com
  Smartphones > Oppo > Oppo Reno11

Firmware Oppo Reno11


 Specification Oppo Reno11 
 Unlock Oppo Reno11 
 Root Oppo Reno11 
 Developer Mode Oppo Reno11 
 Bypass Lock Screen Oppo Reno11 
 Oppo Reno11 Factory Reset 
 Bypass FRP Oppo Reno11 
 Secret codes Oppo Reno11 
 Screenshot Oppo Reno11 

Oppo Reno11


OS: Android 14, ColorOS 14

CPU: Octa-core (2x2.6 GHz Cortex-A78 & 6x2.0 GHz Cortex-A55)
RAM: 128GB 8GB RAM, 256GB 8GB RAM, 256GB 12GB RAM
Display: 6.7 inches, 108.0 cm2 (~89.5% screen-to-body ratio)
Camera: 50 MP, f/1.8, 26mm (wide), 1/1.95", PDAF, OIS
32 MP, f/2.0, 47mm (telephoto), 1/2.74", 0.8µm, PDAF, 2x optical zoom
8 MP, f/2.2, 16mm, 112˚ (ultrawide), 1/4.0", 1.12µm
Battery: Li-Po 5000 mAh, non-removable


Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on your phone's SD card.
- Turn off your smartphone with the Power button.
- Press a specific combination of buttons on the phone body. The set of buttons may differ depending on the phone. If you don't know the combination you want, try pressing the following keys.
- Press the Power + Volume up (or Volume Down) (+Home) buttons together for 10-20 seconds.
- Recovery mode will appear on the screen.
- Use the volume buttons to navigate the menu and the Power button to make a selection.
- From the Recovery mode menu, select 'Wipe data / factory reset'.
- Select 'Yes - delete all user data' and confirm your choice with the Power button.
- Select 'Wipe cashe partition' from the menu and press the Power button.
- Select 'Yes - Wipe cache' and confirm with the Power button.
- Select 'advanced' and confirm your choice with the Power button.
- Select 'Wipe Dalvik Cache' and confirm with the Power button.
- Select 'Yes - Wipe Dalvik Cache' from the menu and press the Power button.
Go back, press 'Go Back'.
- Select 'mounts and storage' and confirm your choice with the Power button.
- Select 'format / system' and confirm your choice with the Power button.
- Select 'Yes - Format' from the menu and press the Power button.
Go back, press 'Go Back'.
- Highlight 'install zip from sdcard' .
- Choose 'choose zip from sdcard' .
- Select 'Yes - Install your firmware name' from the menu and press the Power button.
- Then select 'Reboot system now' from the Recovery mode menu.

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the SD card of your phone.
- Go to TWRP Recovery. This is done according to the model with CWM.
- Perform a factory reset. When cleaning the phone is finished, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and select the firmware file. Click on it by dragging the slider to the side.
- The process of flashing the phone will take about 2-3 minutes.
- After completion, you must click on the 'Reboot System' item, and reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- Copy the .zip archive with the firmware image to the folder with 'ADB'
- Put your smartphone into fastboot mode and write the prompt in the command line: fastbooflash zip filename.zip.
- Wait for the end of the installation and reboot the device.

Thomas Nilan
Smartphone Expert
Thomas Nilan is a mobile phone expert with in-depth knowledge of the Android and iOS operating systems, who understands the settings of various hidden features that allow you to expand the capabilities of your smartphone, as well as get information about what is going on inside the phone for future repairs. He is an authority in his field, which has allowed him to become a ghostwriter for several technology publications, and he enjoys writing small mobile applications for testing smartphones.

User questions and comments about firmware Oppo Reno11





Post your question or comment