MobileXfiles.com
Deutsch
  Home    Phones    Notebooks   
  Smartphones > Huawei > Huawei P smart 2020 (RUMORED)

Firmware Huawei P smart 2020 (RUMORED)


 Specification Huawei P smart 2020 (RUMORED) 
 Hard reset Huawei P smart 2020 (RUMORED) 
 Bypass FRP Huawei P smart 2020 (RUMORED) 
 Secret codes Huawei P smart 2020 (RUMORED) 
 Opinions Huawei P smart 2020 (RUMORED) 
 Compare Huawei P smart 2020 (RUMORED) 

Huawei P smart 2020 (RUMORED)



OS: Android 10

CPU: Octa-core (2x2.27 GHz Cortex-A76, 6x1.88 GHz Cortex-A55)
RAM: 4 GB, 6 GB
Display: 6.3 inches
Camera: 48 MP (wide), 8 MP (ultrawide), 2 MP
Battery: Li-Po 3900 mAh battery, Battery charging 10W


Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on the phone's SD card (you don't need to unpack the ZIP file).
- Turn off your phone in any convenient way.
- Press a certain combination of buttons on the phone, the combination may vary depending on the manufacturer of the phone. If you do not know the required combination, try pressing the following keys.
- Press the Power + Volume up (or Volume Down) (+Home) keys together for a few seconds.
- Recovery mode will appear on the screen.
- Use the volume buttons to navigate the menu, and use the Power button to select.
- Highlight 'Wipe data / factory reset' and press the Power button.
- Select 'Yes - delete all user data' and confirm your choice with the Power button.
- From the Recovery mode menu, select 'Wipe cashe partition'.
- Select 'Yes - Wipe cache' and confirm with the Power button.
- From the Recovery mode menu select 'advanced' .
- Select 'Wipe Dalvik Cache' and confirm with the Power button.
- Select 'Yes - Wipe Dalvik Cache' and confirm with the Power button.
Go back, press 'Go Back'.
- From the menu select 'mounts and storage' .
- Highlight 'format / system' and press the Power button.
- Select 'Yes - Format' and confirm your choice with the Power button.
Go back, press 'Go Back'.
- Select 'install zip from sdcard' from the menu.
- Highlight 'choose zip from sdcard' .
- Select 'Yes - Install your firmware name' and confirm your choice with the Power button.
- Then select 'Reboot system now' from the Recovery mode menu.

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the phone's SD card.
- Go to TWRP recovery. This is done in the same way as with CWM.
- Perform a factory reset. When cleaning the phone is finished, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and select the firmware file. Click on it by dragging the slider to the side.
- The process of flashing the phone will take 2-3 minutes.
- After completion, you must click on the 'Reboot System' item, and reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- Copy the archive with the firmware image to the folder with 'ADB'
- Put your smartphone into fastboot mode and write the prompt in the command line: fastbooflash zip filename.zip.
- When the installation is over, reboot your phone.




User questions and comments about firmware Huawei P smart 2020 (RUMORED)




Post your question or comment
Name: 
Comment: 
  
What does 1 + 9 equal?