Firmware Honor 30 Pro 5G

OS: Android v10 (Q)

CPU: HiSilicon Kirin 990 5G (7 nm )

RAM: 8 GB

Display: 6.58 inches

Battery: 4000 mAh

Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware you are interested in and place it on the phone's SD card.
- Turn off your smartphone with the Power button.
- Press the desired combination of buttons on the phone body. The set of buttons may differ depending on the phone. A universal option is to try pressing the following keys.
- Press and hold the Power + Volume up (or Volume Down) (+Home) buttons together for a few seconds.
- You will see Recovery mode.
- Use the volume buttons to navigate through the menus and press the Power button to make a selection.
- Next in the menu, select 'Wipe data / factory reset'.
- Then select 'Yes - delete all user data' from the menu.
- Select 'Wipe cashe partition' from the Recovery mode menu.
- Then select 'Yes - Wipe cache' from the menu.
- Select 'advanced' from the menu.
- Then select 'Wipe Dalvik Cache' from the menu.
- Select 'Yes - Wipe Dalvik Cache' and press the Power button.
Go back, press 'Go Back'.
- Select 'mounts and storage' from the menu.
- Next in the menu, select 'format / system' .
- Select 'Yes - Format' and press the Power button.
Go back, press 'Go Back'.
- Select 'install zip from sdcard' .
- Next in the menu, select 'choose zip from sdcard' .
- Select 'Yes - Install your firmware name' and press the Power button.
- Next from the Recovery mode menu select 'Reboot system now' .

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the device's memory.
- Go to TWRP recovery. This is done by analogy with CWM.
- Perform a factory reset. When the phone has finished cleaning, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and find the previously downloaded firmware image. Click on it by dragging the slider to the side.
- The phone flashing process will end in 2-3 minutes.
- After the completion of the firmware operation, you must click on the 'Reboot System' item, and reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- First, copy the .zip archive with the image, and place it in the folder with 'ADB'.
- Next, you need to put your device into fastboot mode and write a request in the command line: fastbooflash zip filename.zip.
- Wait until the end of the installation and reboot the device.