Firmware Honor 20 Lite Youth Edition

OS: Android v9.0 (Pie)

CPU: 2.2 GHz, Octa Core Processor

RAM: 4 GB

Display: 6.3 inches, 1080 x 2400 pixels

Camera: 48 MP
8 MP f/1.8 (Ultra Wide)
2 MP (Depth Sensor) with autofocus

Battery: 4000 mAh, Li-ion Battery

Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on your phone's SD card.
- After that, turn off your smartphone.
- Press the desired combination of buttons on the phone body. The set of buttons may differ depending on the phone. A universal option is to try pressing the following keys.
- Press the Power + Volume up (or Volume Down) (+Home) keys together for a few seconds.
- As a result, the phone will boot into Recovery mode.
- Use the volume buttons to navigate through the menus and press the Power button to make a selection.
- Use the volume buttons to select 'Wipe data / factory reset'.
- From the Recovery mode menu, select 'Yes - delete all user data'.
- From the Recovery mode menu, select 'Wipe cashe partition'.
- From the menu select 'Yes - Wipe cache' .
- Select 'advanced' from the menu.
- From the menu select 'Wipe Dalvik Cache'.
- Select 'Yes - Wipe Dalvik Cache' and confirm with the Power button.
Go back, press 'Go Back'.
- Select 'mounts and storage' from the menu.
- Use the volume buttons to select 'format / system' .
- Select 'Yes - Format' and confirm your choice with the Power button.
Go back, press 'Go Back'.
- Highlight 'install zip from sdcard' .
- Choose 'choose zip from sdcard' .
- Select 'Yes - Install your firmware name' and confirm your choice with the Power button.
- Now from the Recovery mode menu select 'Reboot system now' .

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the SD card of your phone.
- Go to TWRP recovery. This is done by analogy with CWM.
- Perform a factory reset. When cleaning the phone is finished, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and find the previously downloaded firmware image. Click on it by dragging the slider to the side.
- The phone flashing process will end in 2-3 minutes.
- After completion, you must click on the 'Reboot System' item, and reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- Copy the archive with the firmware image to the folder with 'ADB'
- Put your smartphone in fastboot mode and write the prompt in the command line: fastbooflash zip filename.zip, where filename.zip is the name of your firmware.
- Wait for the end of the installation and reboot the device.