Firmware Google Pixel 3 Lite XL

OS: Android v9.0 (Pie)

CPU: Octa core (2.2 GHz, Dual core, Kryo 360 1.7 GHz, Hexa Core, Kryo 360)

RAM: 64 GB

Display: 6.0 inches (15.24 cm)

Battery: Li-ion

Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on your phone's SD card.
- First, turn off the phone with the Power button.
- Clamp a certain sequence of buttons on the phone case. The set of keys may vary depending on the manufacturer of the device. A universal option is to set the following clicks.
- Press the Power + Volume up (or Volume Down) (+Home) buttons simultaneously for a few seconds.
- As a result, the phone will boot into Recovery mode.
- Use the volume buttons to navigate the menu, and use the Power button to select.
- Select 'Wipe data / factory reset' from the menu.
- From the Recovery mode menu, select 'Yes - delete all user data'.
- Select 'Wipe cashe partition' from the menu.
- From the menu select 'Yes - Wipe cache' .
- Use the volume buttons to select 'advanced'.
- From the menu select 'Wipe Dalvik Cache'.
- Select 'Yes - Wipe Dalvik Cache' from the menu.
Go back, press 'Go Back'.
- Use the volume buttons to select 'mounts and storage' .
- Select 'format / system' from the menu.
- Select 'Yes - Format' from the menu.
Go back, press 'Go Back'.
- Highlight 'install zip from sdcard' .
- From the menu, choose 'choose zip from sdcard' .
- Select 'Yes - Install your firmware name' from the menu.
- Now from the Recovery mode menu select 'Reboot system now' .

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the SD card of your phone.
- Go to TWRP Recovery. In the same way as in CWM.
- Perform a factory reset. When the phone has finished cleaning, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and find the previously downloaded firmware image. Click on it by dragging the slider to the side.
- After that, the firmware process will start. This will take about 2-3 minutes.
- After the completion of the firmware operation, you must click on the 'Reboot System' item, and reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- Copy the archive with the firmware image to the folder with 'ADB'
- Now you need to put your device into fastboot mode and write a prompt in the command line: fastbooflash zip filename.zip.
- Wait for the end of the installation and reboot the device.