MobileXfiles.com
Deutsch
  Home    Phones    Tablets    Notebooks   
  Smartphones > BLU > BLU G50 Mega 2022

Firmware BLU G50 Mega 2022


 Specification BLU G50 Mega 2022 
 Unlock BLU G50 Mega 2022 
 Root BLU G50 Mega 2022 
 Developer Mode BLU G50 Mega 2022 
 Bypass Lock Screen BLU G50 Mega 2022 
 BLU G50 Mega 2022 Factory Reset 
 Bypass FRP BLU G50 Mega 2022 
 Secret codes BLU G50 Mega 2022 
 Opinions BLU G50 Mega 2022 
 Screenshot BLU G50 Mega 2022 
 Compare BLU G50 Mega 2022 

BLU G50 Mega 2022


OS: Android 11

CPU: Quad-core 2.0 GHz Cortex-A75
RAM: 32GB 3GB RAM
Display: 6.5" inc
Camera: 12 MP, f/2.2, 1.25µm, AF
-12 MP, f/2.2, 1.25µm, AF
Battery: 4000 mAh, Li-Po, non-removable


Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on your phone's SD card.
- Turn off your phone in any convenient way.
- Press a certain combination of buttons on the phone body, it may vary depending on the phone manufacturer. If you don't know the combination you want, try pressing the following keys.
- Press and hold the Power + Volume up (or Volume Down) (+Home) buttons together for a few seconds.
- The phone will then boot into Recovery mode.
- Use the volume buttons to navigate through menus and the Power button to make selections.
- Highlight 'Wipe data / factory reset' and press the Power button.
- Select 'Yes - delete all user data' from the menu and press the Power button.
- Select 'Wipe cashe partition' from the Recovery mode menu.
- Select 'Yes - Wipe cache' from the menu and press the Power button.
- Select 'advanced' and press the Power button.
- Select 'Wipe Dalvik Cache' from the menu and press the Power button.
- Select 'Yes - Wipe Dalvik Cache' and press the Power button.
Go back, press 'Go Back'.
- Select 'mounts and storage' and press the Power button.
- Highlight 'format / system' and press the Power button.
- Select 'Yes - Format' and press the Power button.
Go back, press 'Go Back'.
- Highlight 'install zip from sdcard' .
- Highlight 'choose zip from sdcard' .
- Select 'Yes - Install your firmware name' and press the Power button.
- Select 'Reboot system now' from the menu.

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the SD card of your phone.
- Go to TWRP recovery. This is done in the same way as with CWM.
- Perform a factory reset. When the phone has finished cleaning, return to the original menu by pressing the 'Back' key.
- From the main menu select 'Install' and find and select the firmware file. Click on it by dragging the slider to the side.
- The phone flashing process will end in 2-3 minutes.
- After the completion of the firmware operation, you must click on the 'Reboot System' item, and reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- First, copy the .zip archive with the image, and place it in the folder with 'ADB'.
- Put your smartphone into fastboot mode and write the prompt in the command line: fastbooflash zip filename.zip.
- Wait for the end of the installation and reboot the device.



User questions and comments about firmware BLU G50 Mega 2022





Post your question or comment