MobileXfiles.com
  Smartphones > ZTE > ZTE Yuanhang 10

Firmware ZTE Yuanhang 10


 Specification ZTE Yuanhang 10 
 Unlock ZTE Yuanhang 10 
 Root ZTE Yuanhang 10 
 Developer Mode ZTE Yuanhang 10 
 Bypass Lock Screen ZTE Yuanhang 10 
 ZTE Yuanhang 10 Factory Reset 
 Bypass FRP ZTE Yuanhang 10 
 Secret codes ZTE Yuanhang 10 
 Screenshot ZTE Yuanhang 10 

ZTE Yuanhang 10


OS: Android v11

CPU: 2.2 GHz, Octa Core Processor
RAM: 4 GB
Display: 6.52 inches, 1080 x 2400 pixels, 90 Hz
Camera: 16 MP (Wide Angle)
5 MP f/2.4 (Macro)
2 MP f/2.4 (Depth Sensor) with autofocus
Battery: 4000 mAh, Li-Po Battery


Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on your phone's SD card.
- Turn off your phone in any convenient way.
- Clamp a certain sequence of buttons on the phone case. The set of keys may vary depending on the manufacturer of the device. A universal option is to set the following clicks.
- Press the buttons: Volume up (or Volume Down) (+Home) + Power together for a while.
- As a result, the phone will boot into Recovery mode.
- Use the volume buttons to navigate the menu, and use the Power button to select.
- Highlight 'Wipe data / factory reset' and press the Power button.
- From the Recovery mode menu, select 'Yes - delete all user data'.
- Next in the menu, select 'Wipe cashe partition'.
- From the menu select 'Yes - Wipe cache' .
- Use the volume buttons to select 'advanced'.
- From the menu select 'Wipe Dalvik Cache'.
- Next in the menu, select 'Yes - Wipe Dalvik Cache'.
Go back, press 'Go Back'.
- Use the volume buttons to select 'mounts and storage' .
- Highlight 'format / system' and press the Power button.
- Next in the menu, select 'Yes - Format' .
Go back, press 'Go Back'.
- Highlight 'install zip from sdcard' .
- Highlight 'choose zip from sdcard' .
- Next in the menu, select 'Yes - Install your firmware name' .
- Now from the Recovery mode menu select 'Reboot system now' .

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the SD card of your phone.
- Go to TWRP recovery. This is done in the same way as with CWM.
- Perform a factory reset by tapping the 'Wipe' option in the main menu. When finished cleaning the phone, return to the original menu by pressing the 'Back' key.
- In the main menu, select 'Install' and find the previously downloaded firmware image. Click on it by dragging the slider to the side.
- After that, the firmware process will start. This will take about 2-3 minutes.
- Upon completion, the utility will automatically display a message about successful flashing. By clicking on the item 'Reboot System', reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- Copy the .zip archive with the image, and place it in the folder with 'ADB'
- Put your smartphone into fastboot mode and write the prompt in the command line: fastbooflash zip filename.zip.
- Wait for the end of the installation and reboot the device.



Thomas Nilan
Smartphone Expert
Thomas Nilan is a mobile phone expert with in-depth knowledge of the Android and iOS operating systems, who understands the settings of various hidden features that allow you to expand the capabilities of your smartphone, as well as get information about what is going on inside the phone for future repairs. He is an authority in his field, which has allowed him to become a ghostwriter for several technology publications, and he enjoys writing small mobile applications for testing smartphones.


User questions and comments about firmware ZTE Yuanhang 10





Post your question or comment