MobileXfiles.com
  Smartphones > Meizu > Meizu 20 Infinity

Firmware Meizu 20 Infinity


 Specification Meizu 20 Infinity 
 Unlock Meizu 20 Infinity 
 Root Meizu 20 Infinity 
 Developer Mode Meizu 20 Infinity 
 Bypass Lock Screen Meizu 20 Infinity 
 Meizu 20 Infinity Factory Reset 
 Bypass FRP Meizu 20 Infinity 
 Secret codes Meizu 20 Infinity 
 Screenshot Meizu 20 Infinity 

Meizu 20 Infinity


OS: Flyme 10

CPU: Octa-core (1x3.2 GHz Cortex-X3 & 2x2.8 GHz Cortex-A715 & 2x2.8 GHz Cortex-A710 & 3x2.0 GHz Cortex-A510)
RAM: 256GB 12GB RAM, 512GB 12GB RAM
Display: 6.79 inches, 107.7 cm2 (~89.9% screen-to-body ratio)
Camera: 50 MP, f/1.8, 23mm (wide), 1/1.56", PDAF, OIS
12 MP f/2.0, 50mm (telephoto), 1/2.9", PDAF, OIS, optical zoom
12 MP, f/2.2, 13mm, 122˚ (ultrawide), 1/2.55"
Battery: Li-Po 4800 mAh, non-removable


Before flashing, you need
Create a full backup of the firmware.
The battery must be 100% charged.

1. Flashing your phone using CWM Recovery
2. Flashing the phone using TWRP Recovery
3. Flashing the phone using Fastboot

1. Phone flashing using CWM Recovery
The rich functionality of CWM Recovery www.clockworkmod.com allows you to perform many manipulations with the device, including rolling the firmware. By default, stock Recovery is installed in the devices, which means that first you need to install the ClockWorkMod Recovery utility itself.
The general firmware process described below is for ZIP files. Instructions: - Download the firmware and place it on your phone's SD card.
- Next, turn off your phone.
- Press a certain combination of buttons on the phone body, it may vary depending on the phone manufacturer. If you don't know the combination you want, try pressing the following keys.
- Press the Power + Volume up (or Volume Down) (+Home) keys together for a few seconds.
- The phone will boot into Recovery mode.
- Use the volume buttons to navigate through menus and the Power button to make selections.
- Then select 'Wipe data / factory reset' from the menu.
- Select 'Yes - delete all user data' and press the Power button.
- From the Recovery mode menu, select 'Wipe cashe partition'.
- Select 'Yes - Wipe cache' and press the Power button.
- Select 'advanced' and press the Power button.
- Select 'Wipe Dalvik Cache' and press the Power button.
- Select 'Yes - Wipe Dalvik Cache' and confirm with the Power button.
Go back, press 'Go Back'.
- Select 'mounts and storage' and press the Power button.
- Then select 'format / system' from the menu.
- Select 'Yes - Format' and confirm your choice with the Power button.
Go back, press 'Go Back'.
- Highlight 'install zip from sdcard' .
- Then select 'choose zip from sdcard' from the menu.
- Select 'Yes - Install your firmware name' and confirm your choice with the Power button.
- Then select 'Reboot system now' .

2. Flashing the phone using TWRP Recovery
For those who prefer working with the utility in the form of TWRP Recovery, the following instructions for the step-by-step installation of the update in the form of a ZIP archive are offered:
- Upload the file with the firmware image to the SD card of your phone.
- Go to TWRP recovery. This is done in the same way as with CWM.
- Perform a factory reset. When cleaning the phone is finished, return to the original menu by pressing the 'Back' key.
- From the main menu select 'Install' and find and select the firmware file. Click on it by dragging the slider to the side.
- The phone flashing process will end in 2-3 minutes.
- After completion, you must click on the 'Reboot System' item, and reboot the device.

3. Flashing the phone using Fastboot
A universal tool for flashing Android smartphones using a PC is the Fastboot utility. It is part of the SDK Platform Tools, which means it is suitable for a large number of devices.
Before starting the firmware, you need to get access to the system kernel. Very often, many manufacturers block this system parameter, not wanting users to change the system files of their firmware images with their own hands. To do this, you need to unblock Bootloader. To do this, you need to study the detailed instructions for configuring and managing the command line. Before starting the firmware using a computer, do not forget to enable USB debugging of the device in the engineering settings of the device.
- Copy the archive with the firmware image to the folder with 'ADB'
- Put your smartphone in fastboot mode and write the prompt in the command line: fastbooflash zip filename.zip, where filename.zip is the name of your firmware.
- Wait for the end of the installation and reboot the device.



Thomas Nilan
Smartphone Expert
Thomas Nilan is a mobile phone expert with in-depth knowledge of the Android and iOS operating systems, who understands the settings of various hidden features that allow you to expand the capabilities of your smartphone, as well as get information about what is going on inside the phone for future repairs. He is an authority in his field, which has allowed him to become a ghostwriter for several technology publications, and he enjoys writing small mobile applications for testing smartphones.


User questions and comments about firmware Meizu 20 Infinity





Post your question or comment