| Specification Apple iPhone SE 2 |
| Jailbreak Apple iPhone SE 2 |
| Unlock Apple iPhone SE 2 Passcode |
| Bypass FRP Apple iPhone SE 2 |
| Screenshot Apple iPhone SE 2 |
| Compare Apple iPhone SE 2 |
|
OS: iOS CPU: Quad-core, 2340 MHz, Hurricane and Zephyr, 64-bit, 16 nm RAM: 2GB Display: 4.0 inches Camera: 12 megapixels Battery: 1700 mAh |
| *#06# | - IMEI (International Mobile Equipment Identity) number |
| *3001#12345#* and Tap call | - Enter Field Mode. |
| *777# and Tap call | - Account balance for prepaid iPhone. |
| *225# and Tap call | - Bill Balance. (Postpaid only) |
| *646# and Tap call | - Check minutes. (Postpaid only). It will display you the available minutes of your talk time. |
| *#30# and Tap call | - Calling line presentation check. |
| *#5005*7672# and Tap call | - SMS Message Center Number |
| *331* | - Barring code # Outgoing calls abroad to block the lock code to inquire about her please contact your network operator. |
| *936# and Tap call | - To check whether your phone is eligible for firmware upgrade |
| *3282# | - It will let you know about the use of information info. |
| *3370# and Tap call | - EFR(Enhanced Full Rate) Mode. |
| #3370# | - Disable EFR mode. |
| Outgoing Call Anonymity | |
| *#31# and Tap call | - It allow you hide your number. |
| #31#phone-number and Tap call | - Call Anonymity |
| Call Baring | |
| *#33# and Tap call | - Check for call control bars. |
| *33*pin# and Tap call | - Turn ON Call Barring |
| #33*pin# and Tap call | - Turn OFF Call Barring |
| Call Waiting | |
| *#43# and Tap call | - Determine if call waiting is enabled. |
| *43# and Tap call | - Activate a waiting. |
| #43# and Tap call | - Deactivate waiting. |
| *#76# and Tap call | - Check whether the connected line presentation is enabled or not. |
| Call Forwarding | |
| *#21# and Tap call | - Setting interrogation for call forwards. |
| *#62# and Tap call | - Check the number for call forwarding if no service is available. |
| *#67# and Tap call | - Check the number for call forwarding when the iPhone is busy. |
| ##002# and Tap call | - Disable All Forwarding. After that all incoming calls can be received only by the subscriber. |
| *#61# and Tap call | - Check the number for unanswered calls. |
| Change code | |
| **03*old code*new code*new code# | |
| - Change code for call barring | |
| **04*old PIN code*new PIN *new PIN# | |
| - Change SIM Card PIN code | |
| **042*old PIN2 code*new PIN2*new PIN2# | |
| - Change SIM Card PIN2 code | |
| **05*PUK code*new PUK*new PUK# | |
| - Change SIM Card PUK code | |
| **052*PUK2 code*new PUK2*new PUK2# | |
| - Change SIM Card PUK2 code | |
| GSM codes for Call waiting | |
| *43# | - Ńall waiting Activate |
| #43# | - Ńall waiting Deactivate |
| *#43# | - Check status of call waiting |
| Call Forwarding | |
| ##002# | - Disable All Call Forwarding |
| **004*PhoneNumber# | - Set all configured call diversions to PhoneNumber |
| ##004# | - Unregister all configured call diversions |
| GSM codes for Call Forward All | |
| *21*PhoneNumber# | - Register and activate divert all calls to PhoneNumber |
| ##21# | - Unregister divert all calls |
| *21# | - Enable divert all calls |
| #21# | - Disable divert all calls |
| *#21# | - Check status of divert all calls |
| Divert calls if your line is "no answer" | |
| **61*PhoneNumber# | - Register and activate divert on no answer to PhoneNumber |
| ##61# | - Unregister divert on no answer |
| *61# | - Divert on no answer calls Activate |
| #61# | - Divert on no answer calls Deactivate |
| *#61# | - Check status of divert on no answer |
| Set call forwarding in case of "not available" | |
| **62*PhoneNumber# | - Register and activate divert on not reachable |
| ##62# | - Unregister divert on not reachable |
| *62# | - Activate divert on not reachable |
| #62# | - Deactivate divert on not reachable |
| *#62# | - Check status of divert on not reachable |
| Set up call forwarding in case of "busy" | |
| **67*PhoneNumber# | - Register and activate divert on busy |
| ##67# | - Unregister divert on busy |
| *67# | - Activate divert on busy |
| #67# | - Deactivate divert on busy |
| *#67# | - Check status of divert on busy all call types |
| *#67*11# | - Check status of divert on busy voice calls |
| *#67*13# | - Check status of divert on busy fax calls |
| *#67*25# | - Check status of divert on busy data calls |
| GSM codes for barring all outgoing calls | |
| **33*code# | - Activate barr all outgoing calls (for code see "Safety" above) |
| #33*code# | - Deactivate barr all outgoing calls |
| *#33# | - Check status of barr all outgoing calls |
| Barr all calls | |
| **330*code# | - Enable Barr all calls on your phone |
| #330*code# | - Disable Barr all calls on your phone |
| *#330*code# | - Check status of barr all calls |
| Block all outgoing international calls | |
| **331*code# | - Activation Barr all outgoing international calls |
| #331*code# | - Deactivate Barr all outgoing international calls |
| *#331*code# | - Check status of barr all outgoing international calls |
| USSD Codes For Barring all outgoing international calls except home country | |
| **332*code# | - Enable barr all outgoing international calls except home country |
| #332*code# | - Disable Barr all outgoing international calls except home country |
| *#332*code# | - Check status of barr all outgoing international calls except home country |
| Barr all outgoing calls | |
| **333*code# | - Activation Barr all outgoing calls |
| #333*code# | - Deactivate Barr all outgoing calls |
| *#333# | - Check status of barr all outgoing calls |
| GSM codes for barring all incoming calls | |
| **35*code# | - Enable Barr all incoming calls on your phone |
| #35*code# | - Disable Barr all incoming calls on your phone |
| *#35# | - Check status of barr all incoming calls |
| Barr all incoming calls when roaming | |
| **351*code# | - Enable Barr all incoming calls when roaming on your phone |
| #351*code# | - Disable Barr all incoming calls when roaming on your phone |
| *#351# | - Check status of barr all incoming calls when roaming |
| Block all incoming calls | |
| **353*code# | - Blocking all incoming calls Activate |
| #353*code# | - Block all incoming calls Deactivate |
| *#353# | - Check status of Blocking all incoming calls |
 |
Thomas Nilan Smartphone Expert |
| Thomas Nilan is a mobile phone expert with in-depth knowledge of the Android and iOS operating systems, who understands the settings of various hidden features that allow you to expand the capabilities of your smartphone, as well as get information about what is going on inside the phone for future repairs. He is an authority in his field, which has allowed him to become a ghostwriter for several technology publications, and he enjoys writing small mobile applications for testing smartphones. | |
 | Camden Hall | March 20, 2021 |
| I'm Trying To Unlock The phone | ||
| Reply | ||
| James | August 20, 2021 |
| Trying to unlock iPhone SE. Forgot my password | ||
| Reply | ||
| Chance | September 22, 2021 |
| I try the *3370# on my iPhone se 2 along with other codes and they don’t work with my phone, my carrier is cricket wireless | ||
| Reply | ||
